NUTECH 10 MECHANICAL SEAL
Features and Benefits
EASY TO INSTALL - No measuring is required to install the NUTECH 10 cartridge seal.
NO SHAFT OR SLEEVE WEAR - There are no dynamic O'Rings on the shaft or sleeve to cause the fretting to equipment.
ALIGNMENT BALANCE SHIFT - The balance automatically adjusts providing lower balance for low pressures that results in longer life, and high balance for high pressures that provides consistent low leakage performance.
PRESSURE TESTED - All NUTECH 10 seals are completely pressure tested at the factory to assure no inherent problems at the pump site.
3 WAY CLIPS - A new design clip not only centers the seal but stops axial movement in both directions.